Z-Wave Plus Smart home 2 channel control separately Electrical Plugs Socket (ZW37 )

Place of Origin:
Guangdong, China (Mainland)
Brand Name:
EVA LOGIK
Model Number:
ZW37
Type:
Plug With Socket
Grounding:
Self Grounding
Rated Voltage:
120 VAC, 60 Hz
Rated Current:
15A
Application:
Residential / General-Purpose
Color:
White
Certificate:
UL/FCC/Z-Wave plus
Switch Type:
Push Button
Signal:
908.42 MHZ.
Range:
Up to 100 feet line of sight
Operating Temperature Range:
32-104° F (0-40° C)
Feature:
Scene, S2
Function:
Multi channel smart plug
Material:
PC
Supply Ability:
3000 Piece/Pieces per Day
Packaging Details
Neutral packing
Port
Shenzhen
Lead Time
:
Samples within 2 weeks, mass order 4~6 weeks
Product Description

Introduce

This is a switch plug-in and is used between a standard wall outlet and electrical loads connected to a wall outlet by cable. The unit is rated IP 20 and can therefore be used in dry environments only. The device switches all kinds of loads. The unit is included into a Z-Wave network by a remote control, PC software or any other kind of Z-Wave controller.

Specifications
Model
ZW37
Power
120 VAC, 60 Hz.
Signal (Frequency)
908.42 MHZ.
Maximum load for outlet 
10A, 1200W Resistive
Maximum load for the Z-Wave controlled outlet:

600W Incandescent, ½ HP Motor or 1200W Resistive
Range
Up to 100 feet line of sight between the Wireless Controller

and the closest Z-Wave receiver module

Operating Temperature Range
32-104° F (0-40° C)  For indoor use only
Installation

1.Getting To Know Your New Z-Wave Device

Must not exceed 600 watts (Incandescent): 1200W (10A) Resistive or ½ HP
Motor. Total load capacity for both outlets is 1200W (10A) Resistive.
• One Z-Wave controlled AC outlet for standard incandescent light, CFL/LED, fans or small appliances
• Remote ON/OFF control via the Z-Wave controller
• Manual ON/OFF control with the front panel push button
• One always-on pass-through AC outlet
• Space efficient design
• Does not block the lower outlet when plugged into the upper outlet of a duplex wall receptacle
(This assumes that the duplex receptacle is mounted with the ground pin down).
• Plugs and cords for connected devices route to the side allowing close placement of furniture
• Grounded 3-wire power connection for safety

2.

A. Z-Wave controlled outlet(1channel)
This outlet can remotely turn On/Off the connected device
B. Manual/Program button
Single press — turn the lamp On/Off
Single press — include or exclude in Z-Wave network
C. Z-Wave controlled outlet(2channel)
This outlet can remotely turn On/Off the connected device

3.Title goes here.

1. Plug the light you want to control into the Z-Wave controlled smart outlet on the wireless switch as indicated by the Z-Wave logo

NOTE: Plug directly into outlet, do not use with extension cords

2. Plug the wireless smart switch directly into an available grounded outlet (Top outlet recommend if possible).

TO return your switch to factory default:
1. If plugged in, unplug the smart switch from the receptacle.
2. Press and hold the top button for at least 3 seconds while you plug the smart switch into a receptacle.

3. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.

4.Adding device to Z-Wave network:

1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.

2. Once the controller is ready to include your device, press up and release the toggle to include it in the network.
3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance.
4. The device is associated in the same group when it included in setting process.
Now you can control your Z-wave device according to groups, scenes, schedules and automation programmed. If your controller features remote access, you can now control all devices in Z-Wave network from mobile devices.
To exclude and reset the device
1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network.
2. Once the controller is ready to Exclude your device, press up and release the toggle to exclude it from the network.
Our product can be included and operated in Z-Wave network with other certified devices and/or other applications.

5.All non-battery nodes within Z-Wave network will act as repeater.

1. Follow the instructions for your Z-Wave certified controller to include the device to the Z-Wave network.
2. Once the controller is ready to include your device,single press and release the manual/program button on the device to include it in the network.
3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance.
4. The association group supports two nodes and life line function.

Our Company
Certifications
FAQ

Tested Compatible HUB/Gateway’s

► SmartThings (HUB 1.0 & 2.0)
► Wink (HUB 1.0 & 2.0)
► Vera (UI7 Only)
► HomeSeer
► Staples Connect
► Zipamini (Zipato)
► Alexa/Echo**
**Only works thru a compatible HUB – Please do not buy if you do not have an external HUB

Z-Wave Plus Technology

► Range: 100m (328 ft) line of site 
► Chip: 500 series
► Self-Healing: If there is an issue with your Z-Wave network, these devices have the capability to heal and repair your network
► Compatibility: different brand/manufacturer products can work with each other.

Are you manufacturer or trading company?

We are the manufacturer specializing in developing & producing Z-Wave smart products, both ODM & OEM are welcome.

Welcome to contact me at:

WhatsApp/Wechat/Cell phone : + 86 18814338280

Skype: winniewen18

 

 

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *